.jpg)
Acme Tools issued the following announcement on Sept. 15.
With a few pipe fittings, rope, and a board you can make a rustic desk for your little one. First find a nice flat board for the desk. We selected a 1 ½” thick, 16” x 39” pine board with a live edge. Drill four 1” holes near the corners of the board and sand over the holes’ edges, as well as the rest of the board. After sanding, put several coats of semi-gloss polyurethane on the board. Assemble the fittings to make two handles as shown in the photo and securely mount them to the wall.
The pipe fittings we used were two ½” x 5” nipples, four ½” 90-degree elbows, four ½” x 2” nipples, and four ½” floor flanges. Loop two sections of 3/4” thick rope through the holes and tie the ends to the handles. 20’ of rope was adequate for our two sections. For additional support, attach two “L” brackets to the wall and to the underside of the desk so as not to be seen. #ToolTipTuesday
https://www.acmetools.com/blog/diy-project-wood-wall-hanging-desk/
Original source can be found here.
Source: Acme Tools
Alerts Sign-up